PULPING EQUIPMENT
| MODEL | ZSG1 | ZSG2 | ZSG3 | ZSG5 | ZSG8 | ZSG10 | ZSG15 | ZSG20 | ZSG30 |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 5 | 8 | 10 | 15 | 20 | 30 | |
| Production Capacity ( t/d) | 3~5 | 6~8 | 9~12 | 15~20 | 24~32 | 26~35 | 40~50 | 50~70 | 80~100 |
| Pulping Consistency | 14±2% | ||||||||
| Motor Power (KW) | Y200L-430 | Y200S-437 | Y280M1-655 | Y280M2-675 | Y315L1-6110 | Y355M1-6160 | Y355L1-6220 | Y355L3-6280 | Y4005-6400 |
| MODEL | ZCSG31 | ZCSG32 | ZCSG33 | ZCSG34 | ZCSG35 | ZCSG36 | ZCSG37 |
|---|---|---|---|---|---|---|---|
| Production Capacity (t/d) | 12~20 | 20~40 | 40~60 | 60~90 | 90~120 | 120~160 | 160~200 |
| Throughput (m3/h) | 40 | 60 | 100 | 140~180 | 200~240 | 240~300 | 300~360 |
| Inlet Pressure (Mpa) | 0.2~0.35 | ||||||
| Outlet Pressure (Mpa) | 0.05~0.1 | ||||||
| Inlet Pulp Consistency (%) | 3~5% | ||||||
SELF-WASHING VIBRATORY SCREEN
| MODEL | ZSK3-1.0 | ZSK3-2.0 | ZSK3-3.0 | ZSK3-4.0 |
|---|---|---|---|---|
| Production Capacity (t/d) | 20~30 | 30~40 | 50~60 | 70~80 |
| Screen Area (m2) | 1 | 2 | 3 | 4 |
| Motor Power (KW) | Y132S-8/2.2 | Y132M-8/3 | Y160M1-8/4 | Y160M2-8/5.5 |
UP- FLOW PRESSURIZED SCREEN
| MODEL | ZSL41 | ZSL42 | ZSL43 | ||||
|---|---|---|---|---|---|---|---|
| Nominal Area(m2 ) | 0.3 | 0.6 | 0.8 | ||||
| Hole type | Hole Size mm | Φ1.0~ Φ3.2 | Φ1.0~ Φ3.2 | Φ1.0~ Φ3.2 | |||
| Consistency % | 0.5~1.5 | 1.6~4.0 | 0.5~1.5 | 1.6~4.0 | 0.5~1.5 | 1.6~4.0 | |
| Output t/d | 6~25 | 20~40 | 12~50 | 35~90 | 20~60 | 50~120 | |
| Slot type | Slot Sizevmm | 0.5~1.2 | 0.1~0.55 | 0.1~0.55 | |||
| Consistency % | 0.5~1.2 | 1.4~4.0 | 0.5~1.2 | 1.4~4.0 | 0.5~1.2 | 1.4~4.0 | |
| Output t/d | 4~15 | 10~25 | 6~30 | 20~45 | 10~45 | 30~60 | |
| Motor Power KW | Y180L-6/15 | Y200L-4/30 | Y200L-6/22 | Y225M-4/45 | Y225M-6/30 | Y280S-4/75 | |
GRAVITY CYLINDER THICKENER
| MODEL | ZNW21 | ZNW22 | ZNW23 | ZNW24 | ZNW25 |
|---|---|---|---|---|---|
| Filter Area (m2) | 5 | 10 | 15 | 20 | 25 |
| Inlet Pulp Consistency % | 0.5~1 | ||||
| Outlet Pulp Consistency % | 4~6 | ||||
| Production Capacity (t/d) | 5~15 | 10~30 | 15~35 | 20~60 | 25~75 |
| Motor Power (KW) | YCT180-4A/4 | YCT200-4A/5.5 | YCT200-4B/7.5 | YCT200-4A/7.5 | YCT225-4B/11 |
GRINDING AND DEFIBERING DESANDER
| MODEL | ZC-7 | ZC-10 | ZC-15 | ZC-24 | ZC-30 | ZC-40 | ZC-50 |
|---|---|---|---|---|---|---|---|
| Production Capacity (t/d) | 5~7 | 7~10 | 10~15 | 15~24 | 24~30 | 30~40 | 40~50 |
| Processing Consistency % | 2~5 | ||||||
| Inlet Pulp Pressure (Mpa) | 0.1~0.2 | ||||||
| Motor Power (KW) | Y160M1-2/11 | Y160M2-2/15 | Y180M-2/22 | Y200L1-2/30 | Y200L2-2/37 | Y225M-2/45 | Y250M-2/55 |
DOUBLE DISCS GRINDER
| MODEL | ZDP13-Φ380 | ZDP11-Φ450 |
|---|---|---|
| Grinding Disc Diameter (mm) | φ380 | φ450 |
| Production Capacity (t/d) | 6~20 | 8~40 |
| Inlet Pulp Consistency % | 2~5 | |
| Inlet Pulp Pressure (Mpa) | 0.1~0.3 | |
| Motor Power (KW) | Y250M-6/37 | Y315-6/90 |
Introduction:
For Pulping Equipment, It will be depended on the Raw Material: Pulp Board, Waste Paper, or Mix Pulp ( Pulp Board + Waste Paper).
PULPING EQUIPMENT
Application:
It is only able to be slush the waste paper into the pulp, but also to remove the ink from the fiber through the impact generated by chemicals and the frictional force with comes from the mutual effort by rotor and high consistency pulp fiber. Then the pulp can be bleached into high degree of whiteness in order to produce useful paper pulp.
Features:
The multiple rotors with helical blades which have strong capacity of pulping are equipped on this machine. And this is a batch beating pulper and is convenient to control the beating degree.
HIGH CONSISTENCY DOUBLE CONE CLEANER
Application:
It has great performance of cleaning sand, iron nail, and paper staple from the waste paper pulp.
Features:
Double cones construction, less fiber loss but higher cleaning efficiency; has manual, pneumatic and electric discharge three types; lining of the cones can be chosen from wear-resistance cast iron, stainless steel, or wear-resistance ceramic.
SELF-WASHING VIBRATORY SCREEN
Application:
This device can be used to roughly screen the waste paper pulp (hole screen), or to screen the tailings from pressures screen (slotted screen). And it is great at screening big size impurities such as plastic, rubber, bulky fiber and etc. The vacuum chamber below the screen plate utilizes reciprocal action of air flow to clean the screen plate and avoid blocking.
Features:
Simple structure, High capacity, Convenient handling and maintenance.
UP- FLOW PRESSURIZED SCREEN
Application:
This is designed by “up-flow structure”, and is widely used in coarse or fine screening. The stock enters it from the bottom and the heavy impurity will be removed through the desander to prevent damage for the screen drum.
Features:
It can be equipped with holed screen to screen the pulp roughly, or equipped with slotted screen ( which is bar type and the screen cut can be minimum 0.1 mm ) to clean the tiny impurity.
GRAVITY CYLINDER THICKENER
Application:
It is designed to dehydrate and thicken low consistency stock, not only for wood pulp and straw pulp, but also for any fiber suspension.
Features:
It is suitable for various kinds of stock, has high productivity and easy to be operated.
GRINDING AND DEFIBERING DESANDER
Application:
This equipment is widely applied in processing the dry broke, especially suitable for defibering and desanding with waste paper pulp.
Features:
This device utilizes centrifugal force to disperse shive and swell up fibers, and remove the sand in the stock. These two procedures work at the same time to be efficient but consumes low energy.
DOUBLE DISCS GRINDER
Application:
Stock refining and beating, tailings refining, waste paper pulp defibering and etc.
Features:
High productive efficiency, Low power consumption.
How to Select a Suitable Jumbo Roll Tissue Making Line ?
1). The paper which you want to produce,
2). The Raw Material which you will use, (Pulp Board,Waste Paper, Mix pulp,etc.)
3). The capacity which you want to produce per day,
4). The Paper Width which you require to make,
5). The basis weight of paper which you require to have, etc.
How to select the RIGHT machines ?
Profession Suggestion will be supplied by our Sales Manager & Engineers according to your real situation. We will supply the Right Machines depend on Your Budget,Your Local Suppiler of Jumbo Roll,Your Production Capacity,Your Market Demands,etc.
How many years warranty of the machines ?
All our products will have ONE year guarantee and we will continue to offer advice and spare parts after this period. Standard spare parts and accessories with our machine will be supplied together in wooden case when shipment.
What are the payment terms ?
30% as downpayment by T/T in advance, 70% balance amount by T/T before shipment is our Standard Payment Terms to ALL of our customers in different countries. Irrevocable letter of credit at sight will be considered according to some countries special situation.
How to install & operate our machines ?
Enough photos, VCD and Operation Manual will be supplied together with our machines when shipment. It will show you how to operate this machine.Either of technicians learning at our factory or teaching at your local country is acceptable by our company. ALL these charges will be born by the end-user, such as: visa fee, return air-tickets, accommodation, food and also installation fees,etc.
How to guarantee quality of our machines ?
ALL machines will be tested and have trial production in our factory before leaving our factory and they are shipped out only after customers are satisfied with them. Customers can send your technicians or the Third party inspection agency to our factory to check and accept machines before delivery.
How long does it take for customers to receive our machines ?
As usual,It will take us about 45-60 days to manufacture the new machines after receiving 30% downpayment from customers.
It will take about 7 days for export formality in China.
It will take about 10-30 days for sea transportation.
The average time required is between 50 -90 days depending on the type of machinery being procured.
Service call：+86-411-88160610
