Hot melt box sealing machine is the latest green product, instead of the traditional banding belt, tape.A packing form of carton sealing device.The series of products are made of degradable and pollution-free hot melt adhesive.

On the basis of environmental protection, the adhesive strength is high, the sealing effect is good, and the opening of the tape in the process of transportation is avoided.

After packaging, the overall strength of the carton is strengthened to reduce the deformation and damage rate of the carton.

Suitable for export packaging requirements and disposable packaging.After the carton is opened, it cannot be recovered and recycled, which maximizes the originality of the products and prevents trouble caused by fake products.

Hot melt adhesive seal is the use of hot melt machine to melt hot melt adhesive, and then through the hot melt machine and spray gun throat, to the surface of the carton, and hot melt adhesive cooling to complete the bonding.It can meet the requirements of carton sealing and overcome the defects of traditional carton sealing.

Good packing quality transport carton must withstand temperature changes and rough treatment, but due to poor bonding strength, it is difficult to meet this requirement, tensile strength is small, coating or oily cardboard is not sticky.

Hot melt adhesives and wet materials have a good adhesive force, and has a strong penetration, at the same time between corrugated and lining paper play physical and chemical bonding.

The whole strength of bonded carton is strengthened, carton is not easy to deform and crack.In addition, a hot-melt adhesive coating system can apply adhesives to key components of various shapes, such as the folding lid of a carton.

Second, dry tape resistance to low temperature, in the cold climate in the north easy to open, hot melt adhesive has a good low temperature resistance, can withstand 40 degrees below zero.

In addition, hot melt adhesive storage life up to 2 years, small storage area, no special storage requirements.Dry tape will last only half a year.

Nowadays, businesses require packaging to convey product and corporate image through packaging design.Therefore, the fewer barriers to appearance the better.

Low cost hot melt adhesive sealing speed, the whole bonding process only takes 1~3 seconds to complete, suitable for mass production, low energy consumption, low cost.If the hot melt adhesive is used, the adhesive will not stop during the processing, which improves the efficiency of sealing the box.

Now It’s Your Turn

I hoped you enjoyed my detailed information for starting a business.

Now I want to hear from you:

Which parts from this post are you most excited to know ?

Are you going to know more other kinds of related products? Or do you want to do deep research on this line?

Let me know by leaving a quick comment.